Ruud / Rheem 4-ton Aluminum Air Handler R-410A Single Stage 208/240V, 1 Ph, 60 Hz

 RH1P- Series, PSC Motor, Efficiencies up to 15 SEER:

• Versatile 4-way convertible design for Upflow, Downflow, horizontal left and horizontal right applications.
• Factory-installed indoor coil.
• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
• Field-installed auxiliary electric heater kits (not included) provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
• 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 42 1/2 to 55 1/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
• All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
• Enhanced airflow up to .7" external static pressure.
• Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

• The Rheem RH1P Air Handler with a PSC Motor comes with a versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. It includes a factory-installed indoor coil. Its sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

  
  Standard Features:
   

  • The most compact unit design available, all standard heat air handler models only 42 1/2 to 55 1/2 inches [1079 to 1409 mm] high.
  • Attractive pre-painted cabinet exterior.
  • Rugged wall steel cabinet construction, designed for added strength and versatility.
  • 1.0 foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance.
  • Four leg blower motor mount.
  • Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience.
  • Traditional open wire element design for heat applications.
  • Field convertible for vertical downflow, horizontal left-hand or right-hand air supply.
  • 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors.
  • Indoor coil design provides low air side pressure drop, high performance and extremely compact size.
  • Expansion valve on indoor coil provides for operation with air conditioning.

  
  Cabinet Features:

   

  • Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Coils utilize chatleff metering device connections.
  • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
  • Supply duct flanges provided as standard on air handler cabinet.
  • Provisions for field electrical, connections available from either side or top of the air handler cabinet.
  • Connection point for high voltage wiring is inside the air handler cabinet.
  • Low voltage connection is made on the outside of the air handler cabinet.
  • Concentric knockouts are provided for power connection to cabinet.
  • Installer may pull desired hole size up to 2 inches, 51 mm, for 1 1/2 inch, 38 mm conduit.
  • Front refrigerant and drain connections.