Rheem - Classic Series 2 Ton 17 SEER, R410A, Two-Stage, Non-Communicating, ECM Motor, Air Conditioning Split System
This Product Qualifies For FREE US Shipping
9357
Rheem
In stock ships within 24 to 48 hours
Brand New
CALL FOR PRICE AND AVAILABILITY
RA17 Series (Non-Communicating) - Classic Two-Stage Air Conditioners
- New composite base pan - dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
- Powder coat paint system - for a long lasting professional finish
- The Two Stage Copeland Scroll UltraTech Compressor modulates between two capacity settings - 67% and 100% - providing more precise temperature control, lower humidity and greater efficiency in comparison to single stage compressors. It uses 70% fewer moving parts which also increases efficiency and reliability.
- Modern cabinet aesthetics - increased curb appeal with visually appealing design
- Curved louver panels - provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
- Optimized fan orifice - optimizes airflow and reduces unit sound
- Rust resistant screws - confirmed through 1500 hour salt spray testing
- PlusOne Expanded Valve Space - 3"-4"-5" service valve space - provides a minimum working area of 27 square inches for easier access
- PlusOne Triple Service Access - 15" wide, industry leading corner service access - makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly
- Diagnostic service window with two-fastener opening - provides access to the high and low pressure.
- External gauge port access - allows easy connection of "low-loss" gauge ports
- Single-row condenser coil - makes unit lighter and allows thorough coil cleaning to maintain "out of the box" performance
- 35% fewer cabinet fasteners and fastener-free base - allow for faster access to internal components and hassle-free panel removal
- Service trays - hold fasteners or caps during service calls
- QR code - provides technical information on demand for faster service calls
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
- High and low pressure standard on all models.
RH1V/RH2V- Series
- Quiet, efficient ECM motor technology providing nominal airflow up to 1.0 inch [25 kPa] of external static pressure.
- Interface board with dip switches conveniently located in the blower compartment allows for precise, field selectable airflow to meet the requirements of particular applications.
- Selectable continuous fan "on" options.
- The most compact unit design available.
- Attractive pre-painted cabinet exterior.
- Rugged steel cabinet construction, designed for added strength and versatility.
- 1.0" foil faced insulation mechanically retained in blower compartment.
- Four leg rubber insulated motor mount.
- Field-installed auxiliary heater kit includes circuit breakers that meet UL and cUL requirements as a service disconnect switch.
- Blower housing with integrated controls, motor and blower. Slide out design for service and maintenance convenience.
- Field convertible for vertical upflow, vertical downflow, horizontal left hand or right hand air supply.
- Combustible floor base accessory available when required for downflow installations on combustible floors.
- Indoor coil design provides low air side pressure drop, high performance and extremely compact size. All coils come with PVC condensate elbow standard.
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing.
- Coils are tested at the factory with an extensive refrigerant leak check.
- Coils have copper sweat refrigerant connections.
- Coils utilize chatleff metering device connections.
- Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
- Supply duct flanges provided as standard on air handler cabinet.
- Provisions for field electrical connections available from either side or top of the air handler cabinet.
- Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet.
- Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches (51 mm) for 1 1/2 inch (38 mm) conduit. Front refrigerant and drain connections.
| ERP ID | 381031 |
|---|---|
| Weight | 193.000000 |
| Locked Rotor Amps | 58.3 |
| Number of Fan Blades | 1 |
| Inverter | No |
| Liquid Line Size (OD) | 3/8" |
| Full Load Amps | 1.4 |
| Height | 35.000000 |
| Phase | Single |
| Length | 33.750000 |
| Liquid Line Fitting | Sweat or Braze |
| UL Listed | Yes |
| Tonnage | 2 |
| SEER | 17 |
| Sound Level (dBA) | 72.5 |
| Suction Line Size (OD) | 3/4" |
| Suction Line Fitting | Sweat or Braze |
| Stages Cool | 2 |
| Stage | Two |
| Package Height | 35.000000 |
| Warranty Offered | Yes |
| Package Length | 36.380000 |
| Package Weight | 193.000000 |
| Package Width | 36.380000 |
| Product Family | RA17 |
| Width | 33.750000 |
| Voltage | 208-230 VAC |
| Refrigerant | R-410a |
| UPC | 662021421280 |
| UOM | EA |
| Rated Current Amps | 25 |
| Rated Load Amps | 11.7 |
| Circuit Breaker - Min Amps | 16 |
| Circuit Breaker - Max Amps | 25 |
| CFM | 3326 |
| Certifications | AHRI Standard 210/240, ISO 9001:2015 |
| Condenser Motor HP | 1/5 HP |
| Brand | Rheem |
| Compressor | Scroll |
| Equipment Type | Straight Cool |
| Fins per Inch | 20 |
| Energy Star Rated | Yes |
| Cubic Measurement | 23.071300 |
| Cooling Capacity | 24000 |
| EER | 13 |
| Cycle/Hertz | 60 Hz |
| Dimensional Weight | 327.000000 |
| ERP ID | 372914 |
|---|---|
| Weight | 99.000000 |
| Liquid Line Size (OD) | 3/8" |
| Height | 42.500000 |
| Liquid Line Fitting | Sweat or Braze |
| Length | 21.687500 |
| Phase | Single |
| Package Height | 42.750000 |
| UOM | EA |
| Stage | Two |
| Suction Line Fitting | Sweat or Braze |
| Suction Line Size (OD) | 3/4" |
| Tonnage | 2 |
| UL Listed | Yes |
| SEER | 16 |
| UPC | 662021439285 |
| Package Length | 25.310000 |
| Refrigerant | R-410a |
| Product Family | RH2V |
| Package Width | 24.000000 |
| Voltage | 208-230 VAC |
| Warranty Offered | Yes |
| Width | 21.000000 |
| Package Weight | 113.000000 |
| Brand | Rheem |
| Certifications | ABS Quality Evaluations, Inc. Management System Certification |
| Circuit Breaker - Max Amps | 15 |
| Blower Motor RPM | 300, 300-1100 |
| Blower Motor HP | 1/3 HP |
| Air Flow | Convertible |
| Circuit Breaker - Min Amps | 15 |
| Filter Size | 20" x 20" x 1" for Rheem external filter rack, 20" x 20" x 1" or 2" on Rheem external filter base |
| Equipment Type | Electric Heat / Cool |
| Energy Star Rated | No |
| EAN | 0662021439285 |
| Drain Connections | 2 |
| Dimensional Weight | 186.000000 |
| Cycle/Hertz | 60 Hz |
| Cubic Measurement | 11.201400 |
| Cooling Capacity | 24000 |
| Drain Connection Size | 3/4" |