American Standard - Silver Series, 4A7A4 Line, 2 Ton, 14.3 to 15.5 SEER2, Single Stage Air Conditioner Condenser Unit, R-410A, 208-230/1/60

American Standard 4A7A4024N1000A - 2 Ton, Air Conditioner Unit, R410A, 208-230/1/60

• The outdoor condensing units are factory charged with the system charge required for the outdoor condensing unit, ten (10) feet of tested connecting line, and the smallest rated indoor evaporative coil match. This unit is designed to operate at outdoor ambient temperatures as high as 115°F. Cooling capacities are matched with a wide selection of air handlers and furnace coils that are AHRI certified. The unit is certified to UL 1995. Exterior is designed for outdoor application.
• Unit casing is constructed of heavy gauge, galvanized steel and painted with a weather-resistant powder paint finish. The corner panels are prepainted. All panels are subjected to our 1,000 hour salt spray test.
• Refrigeration system controls include condenser fan, compressor contactor and low and high pressure switches. A factory supplied, field installed liquid line drier is standard.
• The compressor features internal over temperature and pressure protection. Other features include: Centrifugal oil pump and low vibration and noise.
• The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.
• As manufactured, this system has a cooling capacity to 55°F. The addition of an evaporator defrost control permits operation to 40°F. The addition of an evaporator defrost control with TXV permits low ambient cooling to 30°F. The addition of the BAYLOAM107A low ambient kit permits ambient cooling to 20°F.
• Cooling only and heat/cooling (manual and automatic change over). Sub-base to match thermostat and locking thermostat cover.