American Standard - Gold Series, 5 Ton, 16 SEER, Gas Furnace Split System

 Gold Series Split System Cooling - Model 4A7A7 Features and Benefits:

• DURATION™ 2-stage scroll compressor
• Efficiency up to 18.0 SEER
• All Aluminum SPINE FIN™ coil
• DURATUFF™ weather proof and rust proof base
• COMFORT "R"™ mode approved for better comfort indoors
• QUICK-SESS™ cabinet, service access and refrigerant connections with full coil protection
• WEATHERGUARD™ fasteners
• Glossy corrosion resistant finish tarpaulin gray cabinet with anthracite gray top
• Internal compressor high/low pressure and temperature protection
• Liquid line filter/drier
• Low sound with advanced variable speed fan motor
• Service valve cover
• R-410A refrigerant
• From 70 to 100% capacity modulation
• 100% run test in the factoryGold Series Split System Cooling - Model 4A7A7 Features and Benefits:
  • DURATION™ 2-stage scroll compressor
  • Efficiency up to 18.0 SEER
  • All Aluminum SPINE FIN™ coil
  • DURATUFF™ weather proof and rust proof base
  • COMFORT "R"™ mode approved for better comfort indoors
  • QUICK-SESS™ cabinet, service access and refrigerant connections with full coil protection
  • WEATHERGUARD™ fasteners
  • Glossy corrosion resistant finish tarpaulin gray cabinet with anthracite gray top
  • Internal compressor high/low pressure and temperature protection
  • Liquid line filter/drier
  • Low sound with advanced variable speed fan motor
  • Service valve cover
  • R-410A refrigerant
  • From 70 to 100% capacity modulation
  • 100% run test in the factory
  • Low ambient cooling to 55° as shipped
  
  
  Platinum Series, 80% Induced Draft Upflow Horizontal Left/Right, Two Stage Gas Furnace. The Platinum Series High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constant burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access: a) Low energy power venter. b) Vent proving pressure switch.
  
  General Features
  
  Communicating Mode
  Furnace is shipped ready to be connected in communicating mode using three wire hook-up using ACONT900 comfort control.
  
  Alternate 24V Mode
  Furnace is field configurable to 24V no communicating mode.
  
  Comfort Control
  AccuLink II™ Communicating furnace design, offers plug and play - walk away installation. Assures the entire heating and air conditioning system is set up in the proper modes to optimize the engineered performance of the matched system installed.
  
  Natural Gas Models
  Central Heating furnace designs are certified by the American Gas Association for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards.
  
  Safe Operation
  The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety.
  
  Quick Heating
  Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide a positive discharge of gas fumes to the outside.
  
  Burners
  Multiport In-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas.
  
  Integrated System Control
  Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service. Also includes connection points for E.A.C./humidifier.
  
  Air Delivery
  The variable speed, direct drive blower motor, has sufficient airflow for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed.
  
  Styling
  Heavy gauge steel and "wrap-around" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass. Built-in bottom pan and alternate bottom, left or right side return air connection provision.
   
  5 Ton, Aluminum High Efficiency Staged System Cased Coil Dedicated Upflow
  
  Features:

  • All aluminum coil
  • Enhanced Fin Surface
  • 100% foil lined insulation
  • Internally checked non-bleed* thermal expansion valve with mechanical fitting on both sides (heat pump operation)
  • Easy case attachment to furnace
  • Downflow application; convertible to Horizontal Right application with kit
  • Double sloped non-corrosive drain pan - UL rated 400°F
  • Optimized for high efficiency
  • Split inner and outer doors for easy coil inspection and cleaning
  • Painted galvanized steel cabinet to match furnace
• Low ambient cooling to 55° as shipped
•