Rheem / Ruud - 5 Ton Air Handler, Slim 21" Wide, Constant Torque Motor, Single-Stage Airflow, Aluminum Coil 208/240/1/60

This Product Qualifies For FREE US Shipping

6813
Rheem
In stock ships within 24 to 48 hours
Brand New
Free Shipping
CALL FOR PRICE AND AVAILABILITY

The Rheem RH1T Air Handler with a PSC Motor comes with a versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. It includes a factory-installed indoor coil. Its sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.


Standard Features:
 

  • The most compact unit design available, all standard heat air handler models only 42 1/2 to 55 1/2 inches [1079 to 1409 mm] high.
  • Attractive pre-painted cabinet exterior.
  • Rugged wall steel cabinet construction, designed for added strength and versatility.
  • 1.0 foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance.
  • Four leg blower motor mount.
  • Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience.
  • Traditional open wire element design for heat applications.
  • Field convertible for vertical downflow, horizontal left hand or right hand air supply.
  • 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors.
  • Indoor coil design provides low air side pressure drop, high-performance and extremely compact size.
  • Expansion valve on indoor coil provides for operation with air conditioning.


Cabinet Features:
 

  • Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Coils utilize chatleff metering device connections.
  • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
  • Supply duct flanges provided as standard on air handler cabinet.
  • Provisions for field electrical, connections available from either side or top of the air handler cabinet.
  • Connection point for high voltage wiring is inside the air handler cabinet.
  • Low voltage connection is made on the outside of the air handler cabinet.
  • Concentric knockouts are provided for power connection to cabinet.
  • Installer may pull desired hole size up to 2 inches, 51 mm, for 1 1/2 inch, 38 mm conduit.
  • Front refrigerant and drain connections.

 

 
Name Rheem RH1T6021STANJA - 5 Ton Air Handler, 21" Wide, Constant Torque Motor, Single-Stage Airflow, Aluminum Coil 208/240/1/60
Item Number RH1T6021STANJA
Manufacturer Product Number RH1T6021STANJA
SKU - PIM Number 1405422713098
ERP Number 353809
Unit of Measure EA
Weight 139.0 Pounds (Lb)
Length 21.7 Inches (In)
Width 21.0 Inches (In)
Height 57.0 Inches (In)
Country of Origin MEX
Brand Rheem
Equipment Type Electric Heat / Cool
Tonnage 5
Stage Single
SEER 16
Refrigerant R-410a
CFM 1600-1725
Cooling Capacity 60000
Heating Capacity 60000
Air Flow Convertible
Voltage 208-240 VAC
Phase Single
Cycle/Hertz 60 Hz
Circuit Breaker - Min Amps 15
Circuit Breaker - Max Amps 15
Blower Motor HP 3/4 HP
Blower Motor RPM 300-1100
Filter Size External filter rack can accommodate 20" x 20" x 1" or 2
Drain Connection Size 3/4"
Suction Line Fitting Sweat or Braze
Suction Line Size (OD) 7/8"
Liquid Line Fitting Sweat or Braze
Liquid Line Size (OD) 3/8"
Certifications ABS Quality Evaluations, Inc. Management System Certification
Certifications AHRI, ISO 9001:2008
Certifications ISO 9001:2008 Certified
Color Rheem Warm Gray
Warranty Offered Yes
Energy Star Rated No
UL Listed Yes
Product Family RH1T
Drain Connections 2
Tier High Efficiency